It is a fast curing reactive hot melt adhesive and sealant. It is a 100% solid, one-component material with a secondary moisture curing system. The material can be heated and solidified immediately, allowing processing without the need for thermal curing. It has good adhesion to common engineering plastics such as glass, aluminum, stainless steel and polycarbonate.

It is a reactive hot melt adhesive based on polyurethane prepolymer. It takes a long time to turn on. After the bonding line has cured, the adhesive provides good initial strength. The secondary moisture-cured cross-linked tie has good elongation and structural durability.

It is a reactive hot melt adhesive based on polyurethane prepolymer. The adhesive is pressure sensitive and provides high initial strength after adding the part immediately. It has excellent reworkability, good bonding performance and is suitable for the opening time of automatic or manual assembly lines.

It is a pressure-sensitive reactive hot melt adhesive. Its formula is cured by moisture, providing high initial strength and rapid setting speed instantly.

Impact resistant, reworkable is a reactive black polyurethane hot melt adhesive, cured with moisture. Long opening time, suitable for automatic or manual assembly line production.

Easy to repair.

Medium easy to repair, PA substrate bonding.

Easy to repair, fast curing, high elongation, low hardness.

Easy to repair, fast curing, high elongation, low hardness.

Low viscosity, suitable for bonding with extremely narrow frame.

Fast curing, high modulus, ultra-high initial adhesion, high polarity material bonding.

Low viscosity, fast curing.

Fast curing, low modulus, super high initial adhesion.

Fast curing, high modulus, ultra-high initial adhesion, high polarity material bonding.

Ultra-low viscosity, short open time, can be used for LCM side edge sealant.

Ultra-low viscosity, short opening time, can be used on the side of the camera round light.

Low viscosity, short open time, fast curing.

It has a long open time and good light transmittance. It can be used in scenes that cannot be cured by UV and allows for secondary moisture curing. It is widely used in the field of Bluetooth headsets or LCDs that are not easy to dispense and insufficiently irradiated.

General label adhesive, easy to die-cut, high initial adhesion, excellent aging resistance

Suitable for all kinds of low temperature applications above -10°C, easy to die cutting, excellent viscosity at room temperature, can be used for cold chain logistics labels

Suitable for all kinds of low temperature applications above -25°C, easy to die cutting, excellent viscosity at room temperature, can be used for cold storage labels

High initial tack, high stickiness, excellent resistance to plasticization, used in film labels

High adhesion, cold flow pressure sensitive adhesive, can be applied to tire labels

Medium-viscosity removable adhesive, strong adhesion to PE surface material, can be used for removable labels

High-quality, high-viscosity hot-melt pressure-sensitive adhesive specially developed for TV backplane adhesives. The product has light color, low odor, excellent initial adhesion performance, good cohesion, high adhesion, and excellent high temperature resistance. Humidity is 85% and it has certain holding power at 85°C high temperature. It can pass the high temperature and high humidity test and is used for TV back panel pasting.

It is a reactive black polyurethane hot melt adhesive, cured with moisture. This material is pressure sensitive and provides instant high initial strength after connecting parts. It has good basic bonding performance and the opening time suitable for automatic or manual assembly line production.