![product](http://www.hydrogen-water-maker.com/wp-content/plugins/revslider/public/assets/assets/dummy.png)
glue provider for the electronics productions.
![](https://www.hydrogen-water-maker.com/wp-content/uploads/2022/08/products05.jpg)
Enabling electronic products to achieve functional characteristics and performance specifications through superior bonding performance of electronic adhesives is just one aspect of DeepMaterial’s electronic adhesives solution. Protecting printed circuit boards and electronic precision components from thermal cycles and harmful environments is another key component in ensuring product durability and reliability.
DeepMaterial not only provides materials for chip underfilling and COB packaging but also provides conformal coating three-proof adhesives and circuit board potting adhesives, and at the same time brings excellent circuit board-level protection to electronic products. Many applications will place printed circuit boards in harsh environ- ments.
DeepMaterial’s advanced conformal coating three-proof adhesive and potting. Adhesive can help printed circuit boards resist thermal shock, moisture-corrosive materials and various other unfavorable conditions, so as to ensure the product has a long service life in harsh application environments. DeepMaterial’s conformal coating three-proof adhesive potting compound is a solvent-free, low-VOC material, which can improve process efficiency and take into account environmental protection responsibilities.
DeepMaterial’s conformal coating three-proof adhesive potting compound can improve the mechanical strength of electronic and electrical products, provide electrical insulation, and protect against vibration and impact, thereby providing comprehensive protection for printed circuit boards and electrical equipment.
![](https://www.hydrogen-water-maker.com/wp-content/uploads/2022/08/131.jpg)
Product Selection and Data Sheet of Epoxy Potting Adhesive
Product line | Product Series | Product Name | Product Typical Application |
Epoxy Based | Potting Adhesive | DM-6258 | This product provides excellent environmental and thermal protection for packaged components. It is especially suitable for the packaging protection of sensors and precision parts used in harsh environments such as automobiles. |
DM-6286 | This packaged product is designed for applications that require excellent handling performance. Used for IC and semiconduc- tor packaging, it has good heat cycle capability, and the material can withstand thermal shock continuously to 177°C. |
Product line | Product Series | Product Name | Colour | Typical Viscosity (cps) | Initial Fixation Time / full fixation | Curing Method | TG/°C | Hardness/D | Store/°C/M |
Epoxy Based | Potting Adhesive | DM-6258 | Black | 50000 | 120°C 12min | Heat curing | 140 | 90 | -40/6M |
DM-6286 | Black | 62500 | 120°C 30min 150°C 15min | Heat curing | 137 | 90 | 2-8/6M |
Selection And Data Sheet of UV Moisture Acrylic Conformal Coating Three Anti-adhesive
Product line | Product Series | Product Name | Product Typical Application | |||||||
UV Moisture Acrylic Acid |
Conformal Coating Three Anti- adhesive | DM-6400 | It is a conformal coating designed to provide strong protection from moisture and harsh chemicals. Compatible with industry standard solder masks, no-clean fluxes, metallization, components and substrate materials. | |||||||
DM-6440 | It is a single-component, VOC-free conformal coating. This product is specially designed to quickly gel and cure under ultraviolet light, even if exposed to moisture in the air in the shadow area, it can be cured to ensure the best performance. The thin layer of coating can solidify to a depth of 7 mils almost instantaneously. With strong black fluorescence, it has good adhesion to the surface of various metals, ceramics and glass filled epoxy resins, and meets the needs of the most demanding environmentally friendly applications. |
Product line | Product Series | Product Name | Colour | Typical Viscosity (cps) | Initial Fixation Time / full fixation |
Curing Method | TG/°C | Hardness/D | Store/°C/M |
UV Moisture Acrylic Acid |
Conformal Coating Three Anti- adhesive |
DM-6400 | Transparent liquid |
80 | <30s@600mW/cm2 moisture7 D | UV + moisture dual curing |
60 | -40~135 | 20-30/12M |
DM-6440 | Transparent liquid |
110 | <30s@300mW/cm2 moisture2-3 D | UV + moisture dual curing |
80 | -40~135 | 20-30/12M |
Product Selection And Data Sheet of UV Moisture Silicone Conformal Coating Three Anti-adhesive
Product line | Product Series | Product Name | Product Typical Application |
UV Moisture Silicone | Conformal Coating Three Anti-adhesive |
DM-6450 | Used to protect printed circuit boards and other sensitive electronic components. It is designed to provide environmental protection. This product is usually used from -53°C to 204°C. |
DM-6451 | Used to protect printed circuit boards and other sensitive electronic components. It is designed to provide environmental protection. This product is usually used from -53°C to 204°C. | ||
DM-6459 | For gasket and sealing applications. The product has high resilience. This product is usually used from -53°C to 250°C. |
![](https://www.hydrogen-water-maker.com/wp-content/uploads/2022/08/132.jpg)